Using US Robotics Sportster on Annex Terminal Server

Date: Mon, 2 Dec 1996 20:17:06 -0500
From: "Christopher T. Johnson"

Using port 16 (Group 3, plug 4) on the annex. Use /usr/annex/na or the admin command on the annex to set the speed to 57600.

telnet annex 5000
Annex username:_ MEMYSELF
Annex password:_ ANDI
motd
Annex:_ su
Password:_ NOTFORREAL
Annex#_ admin
admin :_ set port=16 speed 57600
admin :_ reset 16
admin :_ quit
annex#_ hang

This will configure port 16 to have a speed of 57600.

Connect a modem to port 16 of the annex. The switch settings should be DuuD uuuD

telnet annex1 5016

Once connected send the following string to the modem:

ati9

Verify the return string matches this:

NO	(1.0USR0011\\Modem\TIA578,TIA592\Sportster 33.6 FAX EXT)FF
YES	(1.0USR0003\\Modem\PNPC107\Sportster 33.6 FAX EXT)FF

If it does not, check with Chris before going on.

send:
at&f1m0&s1s13=1&w

For MP8/16 send
ate1q0
at&f1&s4s13=1s58=1&w

*** For non MP8 modems with DB-25 connectors, omit the "s58=1" portion. That controls RI/DCD pin assignment on the RJ-45 connector.

Then send:
ati4

The results should be:

USRobotics Sportster 33600 Fax Settings...
   B0  E0  F1  M0  Q1  V1  X4  Y0
   BAUD=57600  PARITY=N  WORDLEN=8
   DIAL=HUNT   ON HOOK

   &A3  &B1  &C1  &D2  &G0  &H1  &I0  &K1  &M4  &N0
   &P0  &R2  &S1  &T5  &U0  &Y1  
   
   S00=001  S01=000  S02=043  S03=013  S04=010  S05=008  S06=002
   S07=060  S08=002  S09=006  S10=014  S11=070  S12=050  S13=001
   S15=000  S16=000  S18=000  S19=000  S21=010  S22=017  S23=019
   S25=005  S27=000  S28=008  S29=020  S30=000  S31=128  S32=002
   S33=000  S34=000  S36=014  S38=000
             
   LAST DIALED #: 


Up | Prev | Next